Metal Aluminium Machined Components

Aluminium Machined Components

Meikang CNC part machining Co., Ltd is a wholesale CNC machining aluminum parts factory for more than 25 years.

Factory strength

one-stop service, extrusion, CNC machining, and anodized

Customized service

research and development OEM/ODM service

Product display

1: For the new mold, the processing drawing must meet the requirements, and the data must be clear;
the processing drawing of the new mold must be signed by the supervisor, and each column of the processing drawing has been filled in.

2：The workpiece has the qualified mark of the quality department.

3：After receiving the program sheet, check whether the reference position of the workpiece is consistent with the reference position of the drawing.

4：Look at each requirement on the program sheet, and confirm whether the program and the requirements of the drawing are consistent.
If there is a problem, you must work with the programmer and the production team to solve the problem.

5: According to the material and size of the aluminium machined components, judge the rationality of the programmer’s selection of the tool for roughing or light-knife programs.
If the application of the tool is found to be unreasonable, the programmer should immediately notify the programmer to make corresponding changes in order to improve the processing efficiency and workpiece processing accuracy.

Custom Rapid Prototype Wholesale CNC Machining Aluminum Parts Factory

Meikang CNC part machining Co., Ltd as well as achieving a higher level of precision process, saving costs, and shortening the production cycle, the engineer helps you work it out. Analyzing the technical requirements and quality requirements of the product. Integrated multiple advanced technologies, the engineer analyzes the drawing and process, selects suitable processes for products, and makes a manufacturing scheme, Check that the dimensions of the part drawing should conform to the programming, the geometric elements of the part contour structure should be sufficient, whether the geometric type and size of the inner contour and the outer contour are uniforms, and the machining accuracy and dimensional tolerance of all products should be discussed and determined with the customer.

customized from drawings

extrusion, CNC, and anodized

shipment on time